UB-208RM

eSATA & USB3.0 to 5 SATA Drives H/W RAID Adapter with SCSI-1 Frame

FEATURES

o        5Ports Native SATA II 3Gbps Hardware RAID Adapter

o        Hardware Raid Board with SCSI-1 (Centronics 50pin) Metal frame and Mounting hole

o        Hardware RAID controller on board for max performance

      o    Supports eSATA I, eSATA II, eSATA III, USB2.0 and USB3.0 host connection

o        When USB3.0 or USB2.0 or Port-Multiplier-Aware SATA II or SATA III host connection, support Hardware Raid 0, Raid 1, Raid 3, Raid 5, Clone, JBOD (BigDrive), Individual Drives (PM mode)

o        When SATA I or Port-Multiplier-Not-Aware SATA host connection, support Hardware Raid 0, Raid 1, Raid 3, Raid 5, Clone, JBOD (BigDrive)

o        Supports non-Raid Optical Drives & Blu-Ray Drives when Port-Multiplier-Aware SATA II or SATA III host connection

o        RAID configuration via GUI Software (available for Windows, Linux and Mac) or onboard DIP switch

o        Supports 48-bit LBA addressing

o        Supports Native Command Queue (NCQ)

o        Supports Hot-Plug

o        12 LED Pin Headers for active LED of Host & 5 SATA devices 

o        Compliant with Universal Serial Bus 3.0 Specification Revision 1.0

o        Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction

o        Supports Windows 8, Win7, Vista, XP, 2003, 2008, Mac OS X and Linux kernel 2.4 and above

o        OS independent, no driver required

o        Windows, Linux, Mac Software utility (GUI) can monitor RAID status and management

o        Not Support USB boot drive

o        Fully RoHS compliant