ST-305

RAID Ultra ATA-133 PCI Host (Silicon Image)

Can Support HDD larger than 137GB!

Add High Performance and Reliable Ultra ATA-133  2 Channels / 4 Devices connection and RAID 0, RAID 1, RAID 0+1 on your PC system to support all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE ,IDE storage devices and HDD larger than 137GB

FEATURES

  • Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card  
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB

  • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives

  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives

  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring

  • Supports two independent Ultra ATA-133 channels

  • Supports full speed burst transfers on the ATA bus

  • Supports device read-ahead and write-ahead capability under Virtual DMA

  • Features one 256-byte FIFO (32-bit x 64 deep) per IDE channel for host reads and writes

  • Features command buffering from the PCI to ATA

  • Features Virtual DMA: Bus master transfer on the PCI bus and PIO transfer on the ATA bus

  • Compliant with PCI Specification, revision 2.2

  • Integrated PCI DMA engines

  • 32 bit, 33MHz fully compliant PCI host interface

  • Supports Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP and Linux