ST-209 SATA RAID + 1394a Combo Low Profile PCI Host Adapter |
|
|
Discontinued! ¡@
UB-201
Instead! ¡@ |
FEATURES ¡@ o 2 Ports SATA RAID (1.5Gbps) and 3Ports 1394a (400Mbps) low profile PCI host interface o Compliant with PCI Specification revision 2.2, 32 bit, 33MHz o Integrated PCI DMA engine o Low Profile Form Factor o Provides Low profile PCI and Regular size PCI two brackets o Supports 32bit /64bit Windows 7, Vista, XP, 2000, 2003 server o Fully RoHS compliant ¡@ 1. Serial ATA ¡@ o Independent two ports Native Serial ATA o Serial ATA data rates 1.5Gbps o 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB o Fully compliant with Serial ATA 1.0a specifications o Supports Spread Spectrum in receiver o Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes o Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously reading data from 2 drives o Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives o Acts as NON-RAID card when BIOS not configured to RAID mode o Chipset : SiliconImage ¡@ 2. IEEE 1394 (FireWire 400) ¡@ o Compliant with IEEE 1394 Open Host Controller Interface specification release 1.1 and IEEE Std 1394a-2000 o Provides three 1394 ports (2 External 6Pin connectors+ 1 External 4Pin connector) at 100/200/400 Mbps o Built-in FIFOs for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes), and receive (3072 bytes) o 32-bit CRC generation and checking for receive/transmit packets o On Board Molex mini 4Pin Power connector to have sufficient 1394 1.5A/12V bus power from PC power supply ¡@ |