ST-203

SATA RAID + USB2.0 + 1394a 3-In-1 PCI Host Adapter

Discontinued!

FEATURES

¡@

o        2 Ports SATA RAID (1.5Gbps), 4 Ports USB2.0 (480Mbps) and 3Ports 1394a (400Mbps) PCI host interface

o        Compliant with PCI Specification revision 2.2, 32 bit, 33MHz

o        Integrated PCI DMA engine

o        Supports 32bit /64bit Windows 7, Vista, XP, 2000, 2003 server

o        Fully RoHS compliant

¡@

1. Serial ATA

¡@

o        Independent two ports Native Serial ATA

o        Serial ATA data rates 1.5Gbps

o        48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB

o        Fully compliant with Serial ATA 1.0a specifications 

o    Supports Spread Spectrum in receiver

o        Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes

o        Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously reading data from 2 drives

o        Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives

o        Acts as NON-RAID card when BIOS not configured to RAID mode

o        Chipset : SiliconImage

¡@

2. USB 2.0

¡@

o        Four USB2.0 / USB1.1 ports (3 External + 1 Internal)

o        Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)

o        Compliant with Open Host Controller Interface Specification for USB Rev 1.0a

o        Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95

o        All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction

o        Chipset : NEC

¡@

3. IEEE 1394 (FireWire 400)

¡@

o        Compliant with IEEE 1394 Open Host Controller Interface specification release 1.1 and IEEE Std 1394a-2000

o        Provides three 1394 ports (2 External + 1 Internal) at 100/200/400 Mbps

o        Built-in FIFOs for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes), and receive (3072 bytes)

o        32-bit CRC generation and checking for receive/transmit packets

o        On Board Molex mini 4Pin Power connector to have sufficient 1394 1.5A/12V bus power from PC power supply

¡@

SPECIFICATION

o        Bus Architecture:   Low Profile 32bit PCI Bus (MD1)

¡@

o        Dimension:         120mm x 64mm

¡@

o        PCB:              4 Layers / FR-4 94V0 / 0.5 oz / 1.6mm

¡@

o        Gigabit LAN Port:   RJ-45 Port

¡@

o        SATA Ports:       2 Serial ATA Ports

¡@

o        Temperature:      Operating       +5 ¢J  to  ¡Ï45 ¢J

                      Non Operating ¡Ð25 ¢J  to  ¡Ï70 ¢J

¡@

o        Humidity:          Operating        20¢H to  80¢H

                      Non Operating    15% to  90¢H

¡@

o        EMC Compliance:  EN55022/1998, EN55024/1998 (European Community)

                            FCC Part 15 Class B (DoC) (US)

¡@