ST-200

SATA + USB2.0 + 1394a 3-In-1 PCI Host Adapter

Discontinued!

FEATURES

o        2 Ports SATA (1.5Gbps), 4 Ports USB2.0 (480Mbps) and 3Ports 1394a (400Mbps) PCI host interface

o        Compliant with PCI Specification revision 2.2, 32 bit, 33MHz

o        Integrated PCI DMA engine

o        Completely with drivers for 64bit / 32bit Windows 7, Vista, 2000, 2003 server, XP, 98, and ME

o        Linux kernel version of 2.4.18-14 or later has built-in driver support

o        Fully RoHS compliant

1. Serial ATA

o        Independent two ports Native Serial ATA

o        Serial ATA data rates 1.5Gbps

o        48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB

o        Fully compliant with Serial ATA 1.0a specifications   

o        Supports Spread Spectrum in receiver  

o        Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes

o        Chipset : SiliconImage

2. USB 2.0

o        Four USB2.0 / USB1.1 ports (3 External + 1 Internal)

o        Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)

o        Compliant with Open Host Controller Interface Specification for USB Rev 1.0a

o        Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95

o        All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction

o        Chipset : NEC

3. IEEE 1394 (FireWire 400)

o        Compliant with IEEE 1394 Open Host Controller Interface specification release 1.1 and IEEE Std 1394a-2000

o        Provides three 1394 ports (2 External + 1 Internal) at 100/200/400 Mbps

o        Built-in FIFOs for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes), and receive (3072 bytes)

o        32-bit CRC generation and checking for receive/transmit packets

o        On Board Molex mini 4Pin Power connector to have sufficient 1394 1.5A/12V bus power from PC power supply