ST-152S

eSATA 1 External +1 Internal 2Ports PCI Adapter plus 2.5”  Drive Bay

Add eSATA-150 1 external + 1 internal 2ports and a Drive bay for 2.5” SATA hard drive or SSD mounted on board

FEATURES

o        One eSATA external port and one internal port

o        One 22pin SATA data + power connector for 2.5” SATA HDD / SSD mounted on board, ideal for embedded system

o        48 bits LBA can Break Capacity-Limit to Support drive larger than 137GB

o        Fully compliant with Serial ATA 1.0a specifications

o        Supports SATA data rate 1.5Gbps

o        Independent 256-byte FIFOs (32 bit * 64 deep) per SATA channel for host reading and writing

o        Two HDD accessing LEDs on board

o        Molex 4Pin Power connector supply 2.5” drive power from PC power supply

o        Compliant with PCI Specification, revision 2.2

o        32 bit, 33/66MHz fully compliant PCI host interface

o        Completely with 32bit / 64bit drivers for Windows 7, Vista, 2000, 2003 and XP

o        Linux kernel of 2.4.18-14 or later built-in driver support for this SiI3x12 adapter

      o        Fully RoHS compliant