ST-117R

RAID 4Ports Native SATA-150 2External +2Internal + 2A 5V Bracket Power PCI Host

Native SATA RAID 2External +2Internal Ports with Sufficient 2000mA/5V DC Output !

Add LyCOM Reliable and Eye-Pattern Proven 1,500Mbps of Serial ATA 2 External Ports plus 2 Standard Internal Ports and RAID 0, RAID 1, RAID 0+1, RAID 1+S(Mirrored-Sparing)to your system

This PCI Host Adapter can upgrade your desktop computer to have four Serial ATA Channels. The board provides a 32bit, 33/66 MHz PCI interface on the host side and dual, fully compliant Serial ATA ports on the device side to access Serial ATA mobile external storage devices and standard internal media such as hard disk drive, ZIP drive, CD-ROM, CD-RW, DVD-ROM.

RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping) and RAID 1+S (Mirrored-Sparing) improve the data performance and provide the data redundancy and rebuilding.

FEATURES

  • Two special SATA external shielded and durable connectors for Mobile HDD, Mobile CD-ROM, Mobile DVD, Mobile CD-RW
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  • Sufficient power current 2000mA to supply 5V External Storage

  • Hot-plug capability

  • Four high speed Native Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s

  • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives

  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives

  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring

  • RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed

  • Fully compliant with Serial ATA 1.5G specifications

  • Supports ATAPI devices

  • Supports Spread Spectrum in receiver

  • Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes

  • Compliant with PCI Specification, revision 2.3

  • Four Pin header on board for LED connection

  • Integrated PCI DMA engines

  • 32 bit, 33/66MHz fully compliant PCI host interface 

  • USB-like Connector on board to provide 2000mA / 5V DC power output for External Mobile Devices

  • Supports Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP, 2003 and Linux, Novell Netware

  • Acts as NON-RAID when not BIOS configured RAID