ST-117eN

RAID eSATA-150 2External eSATA +2internal SATA PCI Host

Native SATA RAID 2External (eSATA) +2Internal Ports !

RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping) and RAID 1+S (Mirrored-Sparing) improve the data performance and provide the data redundancy and rebuilding.

FEATURES

  • Two eSATA shielded and durable external connectors
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB

  • Sufficient power current 2000mA to supply 5V External Storage

  • Hot-plug capability

  • Four high speed Native Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s

  • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives

  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives

  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring

  • RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed

  • Fully compliant with Serial ATA 1.5G specifications

  • Supports ATAPI devices

  • Supports Spread Spectrum in receiver

  • Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes

  • Compliant with PCI Specification, revision 2.3

  • Four Pin header on board for LED connection

  • Integrated PCI DMA engines

  • 32 bit, 33/66MHz fully compliant PCI host interface

  • Supports Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP, 2003 and Linux, Novell Netware

  • Acts as NON-RAID when BIOS not configured RAID

  • Supports 64bit / 32bit Windows Vista