ST-114

RAID Native SATA 4Ports Low Profile PCI Host Adapter

FEATURES

o        Four ports high speed Native Serial ATA

o        Serial ATA data rates 1.5Gbps

o        Fully compliant with Serial ATA 1.0 specifications   

o        48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB

o        Low Profile Form Factor

   o    Provides Low profile PCI and Regular size PCI two brackets

o        Hot-plug capability

o        Supports Spread Spectrum in receiver

o        Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes

o        Compliant with PCI Specification, revision 2.3

o        32 bit, 33/66MHz fully compliant PCI host interface  

o        Supports ATAPI commands

o        Integrated PCI DMA engines

o        Four Pin headers on board for LED connection

o        Supports RAID 0 (Stripping), RAID 1 (Mirroring), RAID 0+1 (Mirrored-Stripping), RAID 1+S (Mirrored-sparing)

o        RAID 0 mode supports Max 2TB capacity only

o        RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed.

o        Acts as NON-RAID when no RAID setting in BIOS

o        Supports 64bit / 32bit Windows Vista, XP, 2000, 2003, 98, Millennium, NT 4.0

o        Linux 32bit / 64bit drivers support for Fedora Core2, Fedora Core3, Fedora Core4, RHEL 4.0, RHEL 4.0 Up1, SuSE 9.0 SP1 RC5, SuSE Pro 9.2, SuSE Pro 9.3.

o        Chipset : SiliconImage SiI3114

o        Fully RoHS compliant