DT-128

H/W RAID 2x M.2 SATA SSD to 2.5” 7mm SATA III SSD

Best Solution and Place to Install Fast Speed 2x M.2 NGFF SATA SSD as standard 2.5 inch 7mm SATA III  Drive with H/W RAID Big Drive, 2Drive, RAID 0, RAID 1 Features!

FEATURES

o        6Gbps SATA III H/W RAID Controller

o        Convert 2x M.2 NGFF SATA based SSD to standard 2.5” 7mm SATA drive

o    Supports SATA I, SATA II, SATA III Host port

o        Supports SATA hot plug and booting

o        Supports 6Gbps, 3Gbps SATA based M.2 NGFF 80/60/42/30 mm SSD

o        M.2 NGFF type 2280-D5-B B Key Socket on board

o        Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SSD

o        Supports dual-sided SSD module 1.5mm component height on the top and bottom side

o        Supports H/W RAID 0, RAID1, SPAN (Big Drive) and PM (2Drives) Modes

o    Not support PM (2Drives) Mode if SATA I or no Port Multiplier compatible SATA Host connection

o        22 pin SATA (Signals and Power) male connector on board

o        2x M.2 SSD ACT LED

o        Transparent to the operating system, no driver required on Windows, Mac and Linux

o        Hardware Jumper and Windows & Mac software GUI configure RAID modes

o        Provides Windows and Mac GUI to configure RAID modes and monitor RAID status

o        Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws

o        Compatible with 2.5” SATA drive dimension : 100.45mm x 69.85mm x 7mm

o        Fully RoHS compliant