UB-134

USB 3.1 to 2x mSATA H/W RAID 0 USB SSD

High Speed USB SSD that Configure 2x mSATA SSD to H/W RAID 0 Mode and Achieve USB3.1 825 MB/s Performance!

                      UB-134 Performance Data 825MB/s

FEATURES

o        USB3.1 to 6Gbps SATA III H/W RAID Controller

o        Convert 2x Full Size mSATA SSD to USB3.1 7mm height 2.5” drive

o        Supports H/W RAID 0 Mode

o        Supports 2x SATA II and SATA III (6Gbps) mSATA SSD

o        USB 3.1 Type Micro-B upstream connector on board

o        Supports USB3.1, USB3.0 and USB2.0 main board

o        Compliant with Universal Serial Bus 3.1 Specification Revision 1.0

o        Supports SuperSpeed+ (10 Gbps), SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction

o        Compliant with Serial ATA Specification Revision 2.6

o        Supports Serial ATA transfer rate of 6.0 Gbps

o        Supports ATA/ATAPI Packet Command Set

o        Supports ATA/ATAPI LBA 48 Addressing mode

o        Latch type mSATA connector on board, no need the screw to retain mSATA SSD

o        PCBA & 2x mSATA SSD powered by USB3.1 Micro-B 5V bus

o        When high power mSATA SSD installed, optional DC jack power input can automatically provide mSATA the sufficient power from external 5V power adapter instead of USB bus

o        Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws

o        Dimension of PCBA with 2.5” frame : 100.45mm x 69.85mm x 7mm

      o  Fully RoHS compliant