PE-124

eSATA II -3Gbps External 4Ports PCIe 8 lane Host Adapter

eSATA II-3Gbps External 4Ports PCI-e x8 card support NCQ, Port Multiplier!

FEATURES

o        Four eSATA fully compliant External connectors on card

o        48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB

o        Efficiently cooling by Active cooler with heat sink and Blast Fan

o        Eight Layers PCBA

o        Fully RoHS compliant

1. PCIe

o        x8 PCI Express Bus

o        PCI Express Specification, Revision 1.0a   

o        Maximum realized bandwidth on PCI Express interface is 2 GB/s in each direction simultaneously, for an aggregate of 4 GB/s

2. Serial ATA II

o        Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1  

o        Hot-plug capability

o        Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps

o        Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1

o        Supports First-party DMA commands for Native Command Queuing (NCQ)

o        Supports four independent SATA channels

o        Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution

o        31 Commands and Scatter/Gather Tables per Port

o        Four Pin headers on board for Device LED connection

o        Jumper to enable or disable on board SATA BIOS

o        Staggered Spin-up Control 

o        Completely with drivers for 64bit / 32bit Windows 7, Vista, 2000 ,XP and 2003, 2008 Server

o        Mac OS X v10.3.9, v10.4.9, v10.4.10, v10.5.1, v10.6 Non-booting driver supported by SiliconImage

o        Linux 32bit / 64bit drivers supported for RHEL 4.0 Up2, RHEL 4.0 Up3, SuSE9.0 SP2, SuSE9.0 SP3 by SiliconImage

o        Chipset: Intel controller and SiliconImage SiI3124