Home>Products>Multi-I/O Series

Ultra DMA 133 Raid Control Card Chipset: Silicon Image Support RAID 0,1,0+1 Compliant with PCI Rev 2.2 IDE channel; dual internal channel Data transfer rate: up to Ultra DMA 133Mbytes per channel OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

4 Serial Port and 1 Parallel Port Chipset: Moschip Single 5-V Operation PCI compatible Dual UART 16 byte transmit-receive FIFO (UART) One of IEEE 1284 parallel port and four serial port 5,6,7,8 Bit characters selection Re-map function for legacy ports OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

4 Serial Port & 1 Parallel Port Chipset: Oxford Four full-duplex asynchronous channels IEEE 1284 EPP parallel port Supports COM5, COM6, COM7, COM8 Baud Rates up to 15Mbps in isochronous mode 128-byte deep FIFO per transmitter and receiver Fully software compatible with 16C450, 16C550, 16C650, 16C750 and 16C950 UARTs OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

2 Serial Port and 1 Parallel Port Chipset: Moschip PCI compatible Dual UART 16 byte transmit-receive FIFO (UART) Multi-mode compatible controller (SPP, PS2, EPP, ECP) 16 Byte FIFO (parallel); Compatible with 16C550 Fast data rates up to 1.5 Mbytes/s (parallel port) Re-map function for legacy ports OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

2 Serial Port & 1 Parallel Port Chipset: Oxford Multi-function PCI Bus Specification 2.1 and Power Management 1.0 Two full-duplex asynchronous channels IEEE 1284 EPP parallel port Baud Rates up to 15 Mbps in isochronous mode 128-byte deep FIFO per transmitter and receiver Fully software compatible with 16C450, 16C550, 16C650, 16C750 and 16C950 UARTs OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

2 Serial Port Chipset: Moschip PCI compatible Dual-UART 16 byte transmit-receive FIFO (UART) Compatible with 16C550 Re-map function for legacy ports OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

2 Serial Port Chipset: Oxford Multi-function PCI Bus Specification 2.1 and Power Management 1.0 compliant Supports COM5, COM6 With one 9-Pin and one 25-Pin connectors Baud Rates up to 15 Mbps in isochronous mode 128-byte deep FIFO per transmitter and receiver. Fully software compatible with 16C450,16C550 ,16C650,16C750 and 16C950 UARTs OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

2 Parallel Port Chipset: Moschip PCI compatible 1284 printer port Multi-mode compatible controller (SPP, PS2, EPP, ECP) Fast data rates up to 1.5 Mbytes/s (parallel port) Re-map function for legacy ports 16 Byte FIFO (parallel) Low profile (Option for L220N-2) OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

1 Parallel Port Chipset: Moschip PCI compatible 1284 printer port Multi-mode compatible controller (SPP, PS2, EPP, ECP) Fast data rates up to 1.5 Mbytes/s (parallel port) Re-map function for legacy ports 16 Byte FIFO (parallel) Software programmable mode selects Low profile (Option for L220N-1) OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista

1 Parallel Port Chipset: ITE IEEE 1284 Parallel port Standard mode Bi-directional SPP compliant Enhanced mode EPP V. 1.7 and V. 1.9 compliant High speed mode ECP, IEEE 1284 compliant Back-drive current reduction Printer power-on damage reduction OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003

2 Serial Port Chipset: Moschip PCI compatible Dual-UART Low Power 16 byte transmit-receive FIFO (UART) Status report capability Compliant with 16C550 Re-map function for legacy ports OS: Windows 98SE / ME / NT4.0 / 2000 / XP / 2003 / Vista