Home>Products>PCI-Express / Express Card
USB2.0 Express card
  • General
    • Chipset: Alcor
    • Full single-lane (or x1) PCI Express throughput
    • Supports PCI Express Base Specification Revision 1.0a HARDWARE
    • ExpressCard hot plugging and hot swapping features.
  • USB 2.0
    • Compliant with Universal Serial Bus specification revision 2.0.
    • Provides two external USB2.0 high speed ports.
    • Supports simultaneous operation of multiple USB 2.0 and USB 1.1 devices.
    • Supports data transfer rates of high-speed (480Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps).
  • HARDWARE
    • Type
    		 Express Card 34mm wide
    Interface USB2.0 ExpressCard,
    Mode One-lane 2.5 Gbps PCI Express
    Speed USB2.0- Data transfer rates of high-speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps)
    OS Support Windows 2000 / XP / 2003 / Vista / Mac Book
IEEE1394a Express Card

 
  • General
    • Chipset: TI
    • Full single-lane (or x1) PCI Express throughput
    • Supports PCI Express Base Specification Revision 1.0a HARDWARE
    • ExpressCard hot plugging and hot swapping features.
  • IEEE 1394a
    • Compliant with IEEE 1394 Open Host Controller Interface Specification 1.1
    • Provides IEEE 1394a software enable better performance of the hardware and data transfer.
    • Provides two external independent FireWire ports.
    • Data transfer speeds of 100, 200, 400 Mbps are supported.
    • Fully compliant of IEEE std 1394-1995 and IEEE std 1394a-2000.
    • Supports peer to peer function and allows up to 63 devices to be connected in a chain through its standard 6-pin.
  • HARDWARE
    • Type
    		 ExpressCard 34mm wide
    Interface IEEE1394a Express Card
    Mode One-lane 2.5 Gbps PCI Express
    Speed 1394a-Data Transfer rate of 100, 200, 400 Mbps
    OS Support Windows 2000 / XP / 2003 / Vista / Mac Book
IEEE1394a+USB2.0 Express Card

 
  • General
    • Full single-lane (or x1) PCI Express throughput
    • Supports PCI Express Base Specification Revision 1.0a HARDWARE
    • ExpressCard hot plugging and hot swapping features.
  • USB 2.0
    • Fully supports EHCI and OHCI Compliant standards.
    • Compliant with Universal Serial Bus specification revision 2.0.
    • Provides one external USB2.0 high speed ports.
    • Supports simultaneous operation of multiple USB 2.0 and USB 1.1 devices.
    • Supports data transfer rates of high-speed (480Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps).
  • IEEE 1394a
    • Compliant with IEEE 1394 Open Host Controller Interface Specification 1.1.
    • Provides IEEE 1394a software enable better performance of the hardware and data transfer.
    • Provides two external independent FireWire ports.
    • Data transfer speeds of 100, 200, 400 Mbps are supported.
    • Cable power presence monitoring (power adapter using) for peripherals via 1394 cable.
    • Supports peer to peer function and allows up to 63 devices to be connected in a chain through its standard 6-pin.
  • HARDWARE
    • Type
    		 Express Card 34mm wide
    Interface IEEE1394a & USB2.0 ExpressCard,
    Mode One-lane 2.5 Gbps PCI Express
    Speed 1394a-Data Transfer rate of 100, 200, 400 Mbps
    USB2.0- Data transfer rates of high-speed (480Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps).
    OS Support Windows 2000 / XP / 2003 / Vista / Mac Book
IEEE 1394b Express Card

 
  • General
    • Chipset: TI
    • Full single-lane (or x1) PCI Express throughput
    • Supports PCI Express Base Specification Revision 1.0a HARDWARE
    • ExpressCard hot plugging and hot swapping features.
  • IEEE 1394b
    • Fully supports Provision of IEEE 1394b revision 1.33
    • Compliant with IEEE 1394 Open Host Controller Interface Specification 1.1
    • Supports Low-power sleep mode
    • Provides two external independent FireWire ports.
    • Data transfer speeds of 100, 200, 400, 800 Mbps are supported.
    • Fully supports of IEEE std 1394-1995 and IEEE std 1394a-2000.
    • Supports peer to peer function and allows up to 63 devices
  • HARDWARE
    • Type
    		 Express Card 34mm wide
    Interface IEEE 1394b ExpressCard,
    Mode One-lane 2.5 Gbps PCI Express
    Speed 1394b-Data Transfer rate of 100, 200, 400, 800 Mbps
    OS Support Windows 2000 / XP / 2003 / Vista / Mac Book
GigaNet 1000BASE-T Ethernet ExpressCard/34

 
  • Fully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u (100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T Gigabit Ethernet)
  • 1-lane 2.5Gbps ExpressCard/34
  • Compliant with PCI Express Specification, revision 1.0a
  • Supports Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet 100Mbps (half-duplex), Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and Gigabit 2000Mbps (full-duplex)
  • RJ-45 Port offer high speed transmission over CAT 5 UTP cable
  • LEDs indicate for various network activities
  • Auto-Negotiation with Next page capability
  • Supports pair swap/polarity/skew correction
  • Crossover Detection & Auto-Correction
  • Microsoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload support
  • Supports Full Duplex flow control (IEEE 802.3x)
  • Supports IEEE 802.1Q VLAN tagging
  • 8K Transmit FIFO and 64K Receive FIFO support
  • OS: Windows 2000 / XP / 2003 / Vista & Mac 10.4
eSATA -150 2Port CardBus PC Card

 
  • Supports High Speed Transfer Rate 1,500Mbps, Compare with 480Mbps of USB2.0 and 400Mbps of 1394a
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  • Two External SATA Shielding & Durable connectors (eSATA)
  • PC Card 32 bit CardBus fully compliant
  • Dual high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s
  • Fully compliant with Serial ATA 1.0a specifications
  • Two LEDs indicate for HDD access
  • Supports Spread Spectrum in receiver
  • Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
  • OS: Windows 98SE / ME / 2000 / XP / 2003 / Vista

2 Ports Serial ATAII Express Card (54mm)

 
  • General
    • Full single-lane (or x1) PCI Express throughput
    • Supports PCI Express Base Specification Revision 1.1.HARDWARE
    • Express Card hot plugging and hot swapping features.
  • Serial ATAII
    • Compliant with Serial ATA1.0 specifications
    • Supports Serial ATA Generation 2 transfer rate of 3.0Gb/s
    • Supports hot plug for extend Serial ATA port
    • Supports two independent Serial ATA channels
  • HARDWARE
    Type
    		 Express Card 54mm wide
    Interface SATA II ExpressCard
    Mode One-lane 2.5 Gbps PCI Express
    Speed Max. 2.5 Gbps
    OS Support Windows 2000 / XP / 2003 / Vista
2 Ports Serial ATAII Express Card (34mm)

 
  • General
    • Full single-lane (or x1) PCI Express throughput
    • Supports PCI Express Base Specification Revision 1.1.HARDWARE
    • ExpressCard hot plugging and hot swapping features.
  • Serial ATAII
    • Compliant with Serial ATA1.0 specifications
    • Supports Serial ATA Generation 2 transfer rate of 3.0Gb/s
    • Supports hot plug for extend Serial ATA port
    • Supports two independent Serial ATA channels
  • HARDWARE
    Type
    		 Express Card 34mm wide
    Interface SATA II ExpressCard
    Mode One-lane 2.5 Gbps PCI Express
    Speed Max. 2.5 Gbps
    OS Support Windows 2000 / XP / 2003 / Vista / Mac Book

3 Ports IEEE 1394a / b PCI Express Card

571Se1

  • Chipset: TI
  • Full x1 PCI Express throughput
  • Support PCI Express Base Specification Revision 1.0a
  • Fully supports IEEE 1394-1995 Standard and IEEE 1394a-2000 for high-performance
  • Supports up to 63 devices that can be run simultaneously on a System.
  • Supports data transfer rate up to 100/200/400/800 Mbps.
  • Supports the Plug-and-Play Specification.
  • Two external 1394b port and one external (1394a) / one internal (1394b) share port
  • OS: Windows 2000 / XP / 2003 / Vista / Mac 10
2 Ports IEEE 1394a PCI Express Card

1582TE

  • Chipset: TI
  • Full x1 PCI Express throughput
  • Support PCI Express Base Specification Revision 1.0a
  • Fully supports IEEE 1394-1995 Standard and IEEE 1394a-2000 for high-performance
  • Supports data transfer rate up to 100/200/400 Mbps.
  • One external 1394a port and one external / one internal share port
  • OS: Windows 2000 / XP / 2003 / Vista / Mac 10
1 Parallel Port PCI Express Card

 
  • Chipset: Moschip
  • PCI Express compatible 1284 printer port
  • Multi-mode compatible controller (SPP,EPP,ECP)
  • Fast data rates up to 1.5 Mbytes/s
  • Re-map function for legacy ports
  • 16 Byte FIFO
  • Software programmable mode selects
  • OS: Windows 2000 / XP / 2003 / Vista

2 Parallel Ports PCI Express Card

  • Chipset: Moschip
  • PCI Express compatible 1284 printer port
  • Multi-mode compatible controller (SPP,EPP,ECP)
  • Fast data rates up to 1.5 Mbytes/s
  • Re-map function for legacy ports
  • 16 Byte FIFO
  • Software programmable mode selects
  • OS: Windows 2000 / XP / 2003 / Vista

2 Serial Ports PCI Express Card

 
  • Chipset: Moschip
  • PCI Express compatible Dual UART
  • 16 byte transmit-receive FIFO
  • Programmable Baud Rate Generators
  • Modem Control Signals
  • 5,6,7,& 8-bit Characters
  • Even, Odd, No Parity, or Force Parity
  • Status report capability
  • OS: Windows 2000 / XP / 2003 / Vista

2 Serial Ports and 1 Parallel Port PCI Express Card

  • Chipset: Moschip
  • Dual UART:
    • 16 byte transmit-receive FIFO
    • Programmable Baud Rate Generators
    • 5,6,7,& 8-bit Characters
    • Even, Odd, No Parity, or Force Parity
    • Status report capabilit
  • One Parallel Port
    • SPP, EPP & ECP Modes
    • Fast data rates up to 1.5 MByte/s
    • 16-Byte FIFO
  • Re-map function for legacy ports
  • Software programmable mode selects
  • OS: Windows 2000 / XP / 2003 / Vista

4 Serial Ports and 1 Parallel Port PCI Express Card

  • Chipset: Oxford
  • 4 High performance UARTs with peak asynchronous data rates up to 112Kbps
  • Deep 128-Byte receive/transmit fifos
  • Automated Xon/Xoff in-band flow control
  • Flexible clock prescalar allows for a wide range of baud rates (Max. 112Kbps)
  • IEEE 1284 Compliant SPP, EPP and ECP Parallel Port
  • PCI 3.0 and Power Management 1.1 compliant
  • Software compatible with industry standard 16C550 type devices
  • 3.3V operation
  • OS: Windows 2000 / XP / 2003 / Vista

4-port RS-422/485 PCI Express Card

  • Chipset: Oxford
  • Provides 4-port RS-422/485
  • Speed up to 921.6kbps
  • Supports flow control (RTS/CTS,Xon/Xoff)
  • Automatic RS-485 data flow control
  • UARTs with 128-byte FIFOs standard
  • Provides 15KV ESD Protection and 2500V Isolation Protection
  • Supports PCI Express Base Specification Revision 1.0a
  • OS: Windows 2000 / XP / 2003 / Vista

5 Ports USB 2.0 PCI Express Card

  • Chipset: NEC
  • Single-lane (x1) PCI Express throughput up to 2.5Gbps.
  • Compliant with Universal Serial Bus Specification Revision 2.0.
  • Compliant with OHCI and EHCI standards.
  • Provides three external and two internal (contain one optional) USB2.0 high speed ports.
  • Supports simultaneous operation of multiple USB2.0 and USB1.1 devices.
  • Supports data transfer rates of high-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps).
  • Built-in 4-pin power connector for receiving extra power supply from system.
  • Hot-swapping feature allows you to connect/disconnect devices without poweringdown the system.
  • Provides five USB ports (three external and two internal)
  • OS: Windows 2000 / XP / 2003 / Vista / Mac 10

1 Int. +1 Ext. SATAII PCI Express Card

571Se1

  • Chipset: Silicon Image
  • Full single-lane (or x1) PCI Express throughput
  • Compliant with PCI Express Specification, revision 1.0a.
  • Compliant with Programming Interface for Bus Master IDE Controller, revision 1.0.
  • Supports the Serial ATA Generation 2 transfer rate of 3 Gb/s (300 MB/s).
  • Provides two SATA ports (one external and one internal)
  • Supports hot plug for extend Serial ATA port
  • OS: Windows 2000 / XP / 2003 / Vista

2 Ext. SATAII PCI Express Card

571Se1

  • Chipset: Silicon Image
  • Full single-lane (or x1) PCI Express throughput
  • Compliant with PCI Express Specification, revision 1.0a.
  • Compliant with Programming Interface for Bus Master IDE Controller, revision 1.0.
  • Supports the Serial ATA Generation 2 transfer rate of 3 Gb/s (300 MB/s).
  • Provides two SATA ports (two external)
  • Supports hot plug for extend Serial ATA port
  • OS: Windows 2000 / XP / 2003 / Vista

4 Ext. SATAII PCI Express (x8) Card

571Se1

  • Chipset: Silicon Image
  • Provides four external SATA II ports (3Gbps)
  • Full eight-lane (x8) 2GB/sec PCI Express throughput
  • Supports the Serial ATA Generation 2 transfer rate of 3Gbps (300 MB/s)
  • Supports Port Multipliers with FIS based switching and SteelVine Storage Processors
  • Compliant with Serial ATA 1.0 Specifications
  • Compliant with PCI Express Specification, revision 1.0a
  • Supports hot plug for extend Serial ATA port
  • Supports RAID 0, 1, 0+1 and 5 mode
  • OS: Windows 2000 / XP / 2003 / Vista

1394a 2 Ports Low Profile PCI Express Host (TI chipset)

5101

  • Chipset : TI
  • Includes 2 Brackets (Low profile PCI and Regular size PCI Brackets)
  • Compliant with PCI Express Specification, revision 1.0a
  • 1-lane 2.5Gbps PCI Express host interface
  • Low Profile PCI Form Factor
  • Supports 1394 data transfer rate up to 400 Mbps
  • Fully Supports Provisions of IEEE 1394a-2000 and 1394-1995 Standard
  • Two External 1394a-2000 Fully Compliant Cable Ports at S400, S200, S100 speed
    On Board 4Pin DC Jack to have sufficient 12V1A bus Power for each 1394 port from PC power supply
  • Includes Y-type Power Cable
  • Windows and Mac Built-in drivers
  • Supports Plug and Play
  • OS: Windows 2000 / XP / 2003 / Vista
RAID5 SATA II – 3Gbps Internal Dual Ports Low Profile PCI-Express Host

5103R5

  • Chipset: Silicon Image
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  • Supports 1-lane 2.5Gbps PCI Express
  • Includes 2 Brackets (Low profile PCI and Regular size PCI Brackets)
  • Low Profile PCI Form Factor
  • Hot-plug capability
  • Supports SATA II transfer rate of 3.0Gbps
  • Fully compliant with Serial ATA 1.0 specifications
  • Supports two independent Serial ATA channels
  • Independent Link, Transport, and data FIFO
  • Independent command fetch, scatter/gather, and command execution
  • Supports Legacy Command Queuing (LCQ)
  • Supports Native Command Queuing (NCQ)
  • Supports Non-zero offsets NCQ
  • Supports Out of order data delivery NCQ
  • Supports FIS-based switching with Port Multipliers
  • 31 Commands and Scatter/Gather Tables per Port
  • Two Pin headers on board for LED connection
  • RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate
  • Raid 5 Setting will appear on screen automatically when Port Multiplier and 3rd Drive be connected
  • JBOD is a virtual disk that combines all disk drives as one entire disk drive.
    Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
  • OS: Windows 2000 / XP / 2003 / Vista
GigaNet 1000BASE-T Ethernet Low Profile PCI Express Host

5105N

  • Chipset:Marvell
  • Includes 2 Brackets (Low profile PCI and Regular size PCI Brackets)
  • Fully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u (100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T Gigabit Ethernet)
  • Compliant with PCI Express Specification, revision 1.0a
  • 1-lane 2.5Gbps PCI Express host interface
  • Low Profile PCI Form Factor
  • Supports Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet 100Mbps (half-duplex), Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and Gigabit 2000Mbps (full-duplex)
  • RJ-45 Port offer high speed transmission over CAT 5 UTP cable
  • LEDs indicate for various network activities
  • Auto-Negotiation with Next page capability
  • Supports pair swap/polarity/skew correction
  • Crossover Detection & Auto-Correction
  • Microsoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload support
  • Supports Full Duplex flow control (IEEE 802.3x)
  • Supports IEEE 802.1Q VLAN tagging
  • 8K Transmit FIFO and 64K Receive FIFO support
  • OS: Windows 2000 / XP / 2003 / Vista