EK-102R5
RAID eSATA II ¡V 3Gbps 2 Ports ExpressCard/34 Host Adapter
¡@
EOL , EK-102 instead
¡@
FEATURES
¡@
o Two independent 3Gbps eSATA Ports
o Truly 2.5Gbps PCIe based ExpressCard/34 Form Factor
o Supports ExpressCard/34 and ExpressCard/54 Notebook
o Compliant with PCI Express Specification, revision 1.0a
o Supports SATA II transfer rate of 3.0Gbps
o Fully compliant with Serial ATA 1.0 specifications
o 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
o Supports Legacy Command Queuing (LCQ)
o Supports Native Command Queuing (NCQ)
o Supports Non-zero offsets NCQ
o Supports FIS-based switching with Port Multipliers
o Hot-plug capability
o Two LEDs indicate for HDD accessing
o RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate
o RAID 5 supported need Port Multiplier and 3rd Drive attaches
o JBOD is a virtual disk that combines all disk drives as one entire disk drive.
o Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
o Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
o RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
o Must cold booting if RAID drive unplugged
o Supports up to 5 drives in each RAID group, if through Port Multiplier
o Completely with drivers for 64bit / 32bit Windows 7, Vista, 2000, XP and Server 2003
o Mac OS X v10.4.9, v10.4.10, V10.5.1, V10.6 Non-booting driver supported by SiliconImage
o Linux 32bit / 64bit drivers supported for RHEL 4.0 Up2, RHEL 4.0 Up3, SuSE 9.0 SP2, SuSE 9.0 SP3 by SiliconImage
o Chipset : SiliconImage SiI3132
o Fully RoHS compliant
¡@
