****************************************************************************
**************** D720200 & D720200A Design Resources Release ***************
***** All of the Software is under NDA or Software license agreement ******
****************************************************************************
 Release Note                                              September.30.2011
 
 Renesas Electronics uPD720200 & uPD720200A
 USB 3.0 Host Controller Driver Kit (x86 and x64)
 for Windows XP, VISTA, 7 and Server 2008 Release 2
 
 Kit Version : 2.1.27.0 : September 30, 2011
 Copyright (C) 2010-2011 Renesas Electronics Corporation All Rights Reserved
****************************************************************************

NOTE1:
 This installer package is generated with the InstallShield2010 SP1.
 If the previous driver package (v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed,
 please uninstall the previous driver package and install new package.

---------------------------------------------------------------------------
Table of Contents
---------------------------------------------------------------------------
1. Release Files
2. Command Line Options
3. How to install/uninstall the driver package
4. History
---------------------------------------------------------------------------
---------------------------------------------------------------------------
1. Release Files
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Date        Time         Size   File Name                Version

--EXE (Installer Package)
 2011/09/27 18:49      9509KB   RENESAS-USB3-Host-Driver-21270-setup.exe    2.1.27.0
 2010/04/27 13:49         1KB   setup.iss
 2011/09/27 17:59       979KB   InstallShield 2010 SP1 Projects-110930.zip

--ZIP
 2011/09/27 19:01      8111KB   RENESAS-USB3-Host-Driver-21270-Setup-x86-x64-Binary.zip 2.1.27.0

---contents
 2011/08/23 14:53        11KB   0x0C04.ini
 2009/09/11 14:50        21KB   0x2C0a.ini
 2009/05/20 16:30        24KB   0x040a.ini
 2009/03/18 15:05        22KB   0x040b.ini
 2009/05/20 17:27        25KB   0x040c.ini
 2009/03/16 14:23        18KB   0x040d.ini
 2009/03/18 15:07        22KB   0x040e.ini
 2009/05/20 16:46        22KB   0x041b.ini
 2009/05/20 16:46        22KB   0x041d.ini
 2009/03/18 15:15        22KB   0x041e.ini
 2009/05/20 16:58        22KB   0x041f.ini
 2009/05/20 16:55        19KB   0x0401.ini
 2011/07/15 10:09        11KB   0x0404.ini
 2009/05/20 17:03        22KB   0x0405.ini
 2009/05/20 17:03        23KB   0x0406.ini
 2009/05/20 17:22        25KB   0x0407.ini
 2009/03/18 15:26        26KB   0x0408.ini
 2009/05/21 15:53        21KB   0x0409.ini
 2009/05/20 17:06        24KB   0x0410.ini
 2009/06/08 16:45        15KB   0x0411.ini
 2009/03/16 14:28        14KB   0x0412.ini
 2009/05/20 17:07        24KB   0x0413.ini
 2009/05/20 17:08        23KB   0x0414.ini
 2009/05/20 17:09        23KB   0x0415.ini
 2009/05/20 17:09        23KB   0x0416.ini
 2009/05/20 17:12        22KB   0x0419.ini
 2009/05/20 17:13        23KB   0x0424.ini
 2009/05/21 17:44        11KB   0x0804.ini
 2009/05/20 17:14        24KB   0x0816.ini
 2011/09/27 18:31        92KB   1025.mst
 2011/09/27 18:31        82KB   1028.mst
 2011/09/27 18:31       101KB   1029.mst
 2011/09/27 18:31       101KB   1030.mst
 2011/09/27 18:31       111KB   1031.mst
 2011/09/27 18:31       111KB   1032.mst
 2011/09/27 18:31        37KB   1033.mst
 2011/09/27 18:31       109KB   1034.mst
 2011/09/27 18:31       101KB   1035.mst
 2011/09/27 18:31       109KB   1036.mst
 2011/09/27 18:31        59KB   1037.mst
 2011/09/27 18:31       106KB   1038.mst
 2011/09/27 18:31       110KB   1040.mst
 2011/09/27 18:31       105KB   1041.mst
 2011/09/27 18:31        98KB   1042.mst
 2011/09/27 18:31       106KB   1043.mst
 2011/09/27 18:31        98KB   1044.mst
 2011/09/27 18:31       104KB   1045.mst
 2011/09/27 18:31       103KB   1046.mst
 2011/09/27 18:31       100KB   1049.mst
 2011/09/27 18:31       102KB   1051.mst
 2011/09/27 18:31        98KB   1053.mst
 2011/09/27 18:31        97KB   1054.mst
 2011/09/27 18:31        99KB   1055.mst
 2011/09/27 18:31       102KB   1060.mst
 2011/09/27 18:31        81KB   2052.mst
 2011/09/27 18:31       104KB   2070.mst
 2011/09/27 18:31        82KB   3076.mst
 2011/09/27 18:31        37KB   11274.mst
 2011/09/27 16:06      5774KB   ISSetup.dll
 2011/09/27 18:31       870KB   nusb3drv.msi
 2011/09/27 18:48       973KB   setup.exe
 2011/09/27 18:31         3KB   Setup.ini
 2010/04/27 13:49         1KB   setup.iss

 ----Files
 2011/09/16 14:39        97KB   nusb3mon.dll             2.1.26.0
 2011/09/16 14:39       111KB   nusb3mon.exe             2.1.26.0
 2011/08/03 09:58       313KB   nusb3utl.exe             2.1.22.0
 2011/09/16 14:37        50KB   nusb3ver.dll             2.1.27.0
 -----0C0A
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0C04
 2011/09/08 15:47         2KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----2C0A
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----040A
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----040B
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----040C
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         3KB   nusb3utl.exe.mui
 -----040D
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----040E
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----041B
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----041D
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----041E
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----041F
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0401
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0404
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0405
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0406
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0407
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0408
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         3KB   nusb3utl.exe.mui
 -----0409
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         3KB   nusb3utl.exe.mui
 -----0410
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0411
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0412
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0413
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         3KB   nusb3utl.exe.mui
 -----0414
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0415
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0416
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0419
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0424
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0804
 2011/09/08 15:47         3KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui
 -----0816
 2011/09/08 15:47         4KB   nusb3mon.exe.mui
 2011/07/20 14:24         2KB   nusb3utl.exe.mui

 -----x64
 2011/09/14 17:12        89KB   nusb3co.dll              2.1.18.0
 2011/09/20 16:15         9KB   nusb3hub.cat
 2011/09/13 16:04         3KB   nusb3hub.inf
 2011/09/13 16:14        94KB   nusb3hub.sys             2.1.27.0
 2011/09/20 16:15         9KB   nusb3xhc.cat
 2011/09/13 16:04         3KB   nusb3xhc.inf
 2011/09/13 16:14       208KB   nusb3xhc.sys             2.1.27.0
 -------0C0A
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0C04
 2011/06/03 11:52         1KB   nusb3co.dll.mui
 -------2C0A
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------040A
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------040B
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------040C
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------040D
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------040E
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------041B
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------041D
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------041E
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------041F
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0401
 2011/06/03 11:52         1KB   nusb3co.dll.mui
 -------0404
 2011/06/03 11:52         1KB   nusb3co.dll.mui
 -------0405
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0406
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0407
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0408
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0409
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0410
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0411
 2011/06/03 11:52         1KB   nusb3co.dll.mui
 -------0412
 2011/06/03 11:52         1KB   nusb3co.dll.mui
 -------0413
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0414
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0415
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0416
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0419
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0424
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 -------0804
 2011/06/03 11:52         1KB   nusb3co.dll.mui
 -------0816
 2011/06/03 11:52         2KB   nusb3co.dll.mui
 
 -----x86
 2011/09/14 17:13        87KB   nusb3co.dll              2.1.18.0
 2011/09/20 16:15         8KB   nusb3hub.cat
 2011/09/13 16:04         3KB   nusb3hub.inf
 2011/09/13 16:13        72KB   nusb3hub.sys             2.1.27.0
 2011/09/20 16:15         9KB   nusb3xhc.cat
 2011/09/13 16:04         3KB   nusb3xhc.inf
 2011/09/13 16:14       161KB   nusb3xhc.sys             2.1.27.0
 -------0C0A
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0C04
 2011/06/03 11:51         1KB   nusb3co.dll.mui
 -------2C0A
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------040A
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------040B
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------040C
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------040D
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------040E
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------041B
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------041D
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------041E
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------041F
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0401
 2011/06/03 11:51         1KB   nusb3co.dll.mui
 -------0404
 2011/06/03 11:51         1KB   nusb3co.dll.mui
 -------0405
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0406
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0407
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0408
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0409
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0410
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0411
 2011/06/03 11:51         1KB   nusb3co.dll.mui
 -------0412
 2011/06/03 11:51         1KB   nusb3co.dll.mui
 -------0413
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0414
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0415
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0416
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0419
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0424
 2011/06/03 11:51         2KB   nusb3co.dll.mui
 -------0804
 2011/06/03 11:51         1KB   nusb3co.dll.mui
 -------0816
 2011/06/03 11:51         2KB   nusb3co.dll.mui

---------------------------------------------------------------------------
---------------------------------------------------------------------------
2. Command Line Options
---------------------------------------------------------------------------
---------------------------------------------------------------------------
1) Silent install
 
	Ex.) setup.exe /s

 -To install this driver package silently, "setup.iss" file is needed.
  This package includes the "setup.iss" in which the following folder 
  path is set.
  "C:\Program Files\Renesas Electronics\USB 3.0 Host Controller Driver".

  If you want to change the install path, you need to generate setup.iss as
  follows: setup /r /f1".\setup.iss"


2) Check existence of USB3.0 Host Controller

	Ex.) setup.exe /v"CHECK_HW_EXIST=1"

 -When this command line option is set, the installer checks existence of 
  the USB3.0 Host Controller (uPD720200/uPD720200A). If the uPD720200/uPD720200A
  is not in the PC, this installer does not install the device drivers.

 ##Caution##
  To install the device drivers with this command line option after 
  uninstalling the device drivers, it is necessary to restart the PC.


3) Not install the USB3.0 Monitor application (nusb3mon.exe/dll)

	/v"NO_MONITOR=1"

 -When this command line option is set, the USB3.0 Monitor Application
  (nusb3mon.exe/dll) is not installed.  Refer to USB 3.0 Specification
  Section 11.1 and driver version 1.0.1.0Beta below for further description
  of the monitor function for user notification of USB 3.0 devices connected
  to USB 2.0 ports.

 ##Caution##
  If the USB3.0 Monitor Application is already installed, it is necessary to
  uninstall the USB3 driver package of previous version before installing the 
  new USB3 driver package (v1.0.19.0 or later).


4) Not install the USB3.0 Utility application (nusb3utl.exe)

	/v"NO_UTILITY=1"

 -When this command line option is set, the USB3.0 Utility Application
  (nusb3utl.exe) is not installed.  The Utility Applicatoin shows the
  Driver Version and Firmware Version.

 ##Caution##
  If the USB3.0 Utility Application is already installed, it is necessary to
  uninstall the USB3 driver package of previous version before installing the 
  new USB3 driver package (v2.0.4.0 or later).


5) Disable the Selective Suspend function

	Ex.) setup.exe /v"SET_SELSUS_MODE1=1"

 -Selective Suspend function is enabled by default starting with Ver2.0.20.0. 
  This option disables the Selective Suspend function. The Selective Suspend 
  function is described in section 1.4 & 2.8 of "USB 3.0 Host Controller Driver 
  Application Note (ISG-NC1-200030)". Please see that document for more detail.

 ##Note##
  This option is supported from Ver.2.0.20.0.
  The Selective Suspend function for External Hubs is supported from Ver.2.0.20.0.


6) Hide the pop-up message

	Ex.) setup.exe /v"CHECK_HW_EXIST=1 NO_MESSAGE=1"

 -This option suppresses the pop-up message when it is used with the "CHECK_HW_EXIST"
  option. If you want to hide the pop-up message on the "CHECK_HW_EXIST" option,
  you should use this option on the command line.
 -This option is described in section 2.5 & 2.9 of "USB 3.0 Host Controller Driver 
  Application Note (ISG-NC1-200030)". Please see that document for more detail.
  
 ##Note##
  This option is supported from Ver.2.0.20.0.
  This option must be used only with the "CHECK_HW_EXIST" option. If this option is used
  by itself, it has no effect.


7) Disable the Dynamic U1/U2 state control function

	Ex.) setup.exe /v"U1U2_DISABLE=1"

 -The Dynamic U1/U2 state control function is enabled by default starting with 
  Ver2.0.4.0. If you want to disable the Dynamic U1/U2 state control function,
  you should use this option on the command prompt. 

 ##Note##
  This option is supported from Ver.2.0.26.0.


8) Disable the check box to disable the Dynamic U1/U2 state control function
   on "nusb3utl.exe"

    Ex.) setup.exe /v"U1U2_UTL_DISABLE=1"

 -From ver2.0.26.0, the USB 3.0 Host controller Utility supported the check-box
  to disable the Dynamic U1/U2 state control function. In the default setting, 
  this check-box is set to appear.
  If you don't want to display this checkbox in the USB3.0 Host controller 
  Utility, you should use this option on the command prompt. 

 ##Note##
  This option is supported from Ver.2.0.26.0.

##NEW##
9) Display the Custom Property page in the device manager

    Ex.) setup.exe /v"DP_PROPERTY=1"

 -From ver2.1.16.0, the USB 3.0 Host controller Driver supported the Custom 
  Property page to display the firmware version and disable the Dynamic U1/U2 
  state control function. 
  
 ##Note##
  The Custom Property page is not displayed in default setting with Ver2.1.16.0. 

---------------------------------------------------------------------------
---------------------------------------------------------------------------
3. How to install/uninstall the driver package
---------------------------------------------------------------------------
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Please see the "USB 3.0 Host Controller Driver Application Note (Preliminary)".

A) How to install the driver package
 1. Installing the driver package to a computer. (Run "setup.exe")
 2. Installing the hardware
 3. Installing the driver for USB 3.0 host controller.


B)How to uninstall the driver package
RENESAS-USB3-Host-Driver-xxxx-Setup.exe can uninstall only by using "Programs
and Features" in Control Panel.
 
 1. Open the "control panel".
 2. Click the "Programs and Features".
 3. Select the Renesas Electronics USB 3.0 Host Controller Driver.
 4. Click "Uninstall" button.

---------------------------------------------------------------------------
---------------------------------------------------------------------------
4. History
---------------------------------------------------------------------------
---------------------------------------------------------------------------
 Version 2.1.27.0 : September 30, 2011
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1470054
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Signature Only - Microsoft Windows XP family, x86
                        Signature Only - Microsoft Windows XP family, x64
                        Logo - Microsoft Windows Vista family, x86 Basic
                        Logo - Microsoft Windows Vista family, x64 Basic
                        Windows 7
                        Windows 7 x64 
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64 

-  The following issues, which depend on specific devices, were fixed.
 1. A specific USB Full Speed device that can't respond to a standard request
    isn't detectd.
     
 2. There is a possibility that a multi-display isn't displayed after 
   S3->Resume when the USB-to-VGA device connected to the USB 3.0 Host
   is used in multi-display mode.  This issue occurs depending on USB-to-VGA
   device driver version.
   
 3. There is a possibility that the Bluetooth communication is cut off with 
   a specific Bluetooth module.
 
 4. There is a USB speaker which only requests a data transfer by a URB within 
   about 1ms. In this case, sound is cut off depending on CPU performance.

 5. iPad isn't detected on iTunes application after S3->Resume.
 
 6. BSOD ("Blue Screen of Death," i.e., system halt) occurs when PC shoutdown 
    is performed while a specific Bluetooth module (Billionton BT-0003) is 
    connected and a specific Bluetooth module driver version is being used. 
    This issue doesn't occur with the latest Bluetooth module driver version.
   
-  The following additional issues were fixed.
-- Driver
 1. There is a possibility that BSOD occurs or USB 3.0 Hub isn't detected on
   Windows XP when hot plug operation is done with a USB 3.0 Hub having USB 
   devices already connected to it.

 2. USB 3.0 Host controller Driver forcibly caused BSOD from ver2.1.16.0 to ver
   2.1.25.0 when Host System Error of USB 3.0 occurred.
   When we updated to ver2.1, we had a mistake in which the USB 3.0 Host 
   Controller Driver focibly caused BSOD.

 3. A USB device isn't detected when the USB device is connected to a downstream
   port on a specifc USB 3.0 Hub that moves to U2 state althouth U1/U2 timeout 
   vaule is zero.

 4. There is a miscalucuation of U2 Exit Latency.

--Monitor
 1. The pop-up message is wrong when a USB 3.0 device is connected to USB 2.0 port
   while running the Simplified Chinese OS.
 
 2. The pop-up message is wrong when USB 3.0 Host Controller does not have 
   enough bandwidth available while running the Polish OS.

---------------------------------------------------------------------------
 Version 2.1.25.0 : August 26, 2011
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1464302
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Signature Only - Microsoft Windows XP family, x86
                        Signature Only - Microsoft Windows XP family, x64
                        Logo - Microsoft Windows Vista family, x86 Basic
                        Logo - Microsoft Windows Vista family, x64 Basic
                        Windows 7
                        Windows 7 x64 
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64 

-  The following issues, which depend on specific devices, were fixed.
 1. There is a possibilty that UB435-Q (KWorld Computer Co., Ltd) isn't detected
   during Hot-plug operation.

-  The following additional issues were fixed.
-- Driver
 1. When DeviceIoControl() of IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME
   issued, an error occurs.
   This issue only occurs with Ver 2.1.16.0 & Ver 2.1.19.0.
   
 2. A PC, in which SystemWake is in PowerSystemSleeping3, cannot enter Hybrid sleep.
   This issue only occurs with Ver 2.1.16.0 & Ver 2.1.19.0.

 3. PC doesn't enter Sleep (S3 State) or Hibernate (S4 State) when it should 
   on Windows XP while a USB Hub is connected to the USB 3.0 Host controller.
   This issue depends on the PC. (This issue occurs when ACPI filter driver is
   installed for USB HUB.)
   This issue only occurs with Ver 2.1.16.0 & Ver 2.1.19.0.
   
 4. USB Mouse isn't detected when users perform the below steps.
     a) Connect Mass Storage device & USB Mouse
     b) Operate "Safely Remove Hardware" for Mass Storage device.
        (Don't disconnect Mass Storage device)
     c) Enter sleep (S3 State)
     d) Change the port of Mass Storage device & USB Mouse during S3 State

 5. There is a possiblity that BSOD occurs or SuperSpeed device isn't detected
   when users perform the below steps.
     a) Connect USB 3.0 Hub to USB 3.0 Host Controller
     b) PC enters HybridSleep & resumes
     c) After resuming, SuperSpeed device is connected to USB3.0 Hub
   This issue only occurs with USB 3.0 Hub supporting RemoteWakeUp.

 6. There is a possibility that a data transfer stops with UAS drive.
   This issue only occusr with Ver 2.1.19.0.
 
 7. Re-examined U1 Timeout value.
   U1 transition control was slow from USB 3.0 Host Controller because 
   U1 Timeout value was big in ver 2.1.19.0,
 
--Utility
 1.When nusb3utl.exe runs and USB 3.0 Host Controller is disabled, Windows OS 
  requests the restart.
 
---------------------------------------------------------------------------
---------------------------------------------------------------------------
 Version 2.1.19.0 : June 30, 2011
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1458561
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Signature Only - Microsoft Windows XP family, x86
                        Signature Only - Microsoft Windows XP family, x64
                        Logo - Microsoft Windows Vista family, x86 Basic
                        Logo - Microsoft Windows Vista family, x64 Basic
                        Windows 7
                        Windows 7 x64 
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64 

-  The following issues, which depend on specific devices, were fixed.
 1. Remote Wakeup funtion from Logitec G15 Gaming Keyboard doesn't work.
 
 2. There are specific models of Creative ZEN which aren't detected.


-  The following additional issues were fixed.
-- Driver
 1. USB3.0 devices aren't detected when users perform the below steps.
    a) Turn on a PC.
    b) Enter sleep (S3 state) without connecting USB3.0 devices.
    c) Connect USB3.0 devices to a USB3.0 port during S3 state.
    d) USB 3.0 HDD isn't detected.
   The USB3.0 devices aren't detected after the PC resumes from S3 state.
   This issue only occurs with Ver.2.1.16.0.

 2. There is a possibility of bluescreen caused by Hot-Plug operation of a
   USB3.0 Hub connecting USB3.0 devices. This issue only occurs with Ver2.1.16.0.
 
 3. There is a possibility that USB devices can't be detected after remote 
   wakeup. This issue only occurs with Ver.2.1.16.0. We will add information
   about remote wakeup in the USB3.0 Host Controller Driver Application Note
   in near future.
   
--CoInstaller
 1. Upon opening the "Advanced" tab of Renesas USB 3.0 Host Controller in Device
   Manager and changing the aero theme of "the visuals and sounds on your computer",
   the firmware version and check box of "Disable USB 3.0 power management
   functions" disappears.


---------------------------------------------------------------------------
 Version 2.1.16.0 : April 22th, 2011
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1449502
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Logo - Designed for Microsoft Windows XP family, x86 - DFW
                        Logo - Designed for Microsoft Windows XP family, x64 - DFW
                        Logo - Microsoft Windows Vista family, x86 Basic - Basic
                        Logo - Microsoft Windows Vista family, x64 Basic - Basic
                        Logo - Device - Compatible with Windows 7
                        Logo - Device - Compatible with Windows 7 x64
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64

-  Tuned the Host Driver to improve performance of Stream Transfer.
   With this improvement, the Stream API of the Host Driver was changed.

-  Tuned the Host Driver to improve the intialization time of USB3 Host Controller,
   when an External USB Hub is connected to USB3.0 Root port.

-  Changed the Dynamic U1/U2 state control function.
   End user doesn't need to reconnect the USB 3.0 devices when the Dynamic 
   U1/U2 state control (USB 3.0 Power Management) is changed by RENESAS Electronics
   USB3.0 Host Controller Utility (nusb3utl.exe). 
     ##Caution##
   Don't add the registry ("SSLinkTimeoutMode" & "PMFeatureEnable") to disable the
   USB3.0 Power Management after the driver is installed by the installer or inf
   installation.
   
   Please see section 1.5 of "ISG-NK1-100001-AN_005-DriverPackageInformation.pdf
   (ISG-NK1-100001, Rev.0.05, 2011/04/20)".

-  Added the custom Property Sheet Page to display the FW version and 
   change USB3.0 Powermanagement in the Device Manager. The default setting of 
   this page is disabled.
   If you want to use this page, please install the driver package with using
   the following command-line. Please see the section 1.7 & 2.12 of 
   "ISG-NK1-100001-AN_005-DriverPackageInformation.pdf(ISG-NK1-100001, Rev.0.05,
    2011/04/20)".
   
   <Command Line>
     setup.exe /v"DP_PROPERTY=1"

-  Changed the Remote wakeup function behavior based upon Windows 7.
   From v2.1.16.0, the following 2 cases cannot wake up the system.
    1. Disconnected the USB mouse which is connected to the downstream port of USB Hub. 
    2. Connected the USB device to the USB Hub which the USB mouse is connected. 
    
-  The following issues were fixed.
-- Driver
    1. When a user initially connects a USB compound device (smart phone, etc.) 
      to a USB 3.0 port, there is a possibility that it will not be correctly 
      detected (enumerated), unless it is first plugged into a USB 2.0 port on 
      the same system. This driver update fixes this problem and allows device 
      detection (enumeration) to occur correctly the first time a compound 
      device is plugged into a USB3.0 port.

    2. When the Remote Wake Up is excuted by keyboard, an unwanted string is entered.
      To solve this issue, you need to add the parameter (DWORD(32bit) value) 
      to the following registry key.
      <Registry Key>
        HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\nusb3xhc\Parameters
      <DWORD (32bit) value>
        ForceHCResetOnResume
      <Value data>
        1h

    3. When the hot plug operation is done with the external USB Hub, there is 
      a possibility that the USB Hub is not detected.
       ##Note##
      This issue doesn't occur when the Selective Suspend Function is disabled.

---------------------------------------------------------------------------
 Version 2.0.34.1 : March 31th, 2011
---------------------------------------------------------------------------
- Windows Logo Information is same as Ver2.0.34.0.
  
-  The following issue was fixed.
-- Utility
  1. When the USB3.0 Power management functions(U1/U2 functions) are disabled 
     with the USB3.0 Host Controller Utility, the Kingstone DT Ultimate 16GB 
     is not detected after S4-Resume. This issue also occurs when the host 
     controller driver is installed with the commandline option "U1U2_DISABLE=1".

---------------------------------------------------------------------------
 Version 2.0.34.0 : February 18th, 2011
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1442151
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Logo - Designed for Microsoft Windows XP family, x86 - DFW
                        Logo - Designed for Microsoft Windows XP family, x64 - DFW
                        Logo - Microsoft Windows Vista family, x86 Basic - Basic
                        Logo - Microsoft Windows Vista family, x64 Basic - Basic
                        Logo - Device - Compatible with Windows 7
                        Logo - Device - Compatible with Windows 7 x64
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64

-  The following issues were fixed.
-- Driver
  1. If an ISDN-USB device (AVM FRITZ! Card USB V2.1) is connected to an ExpressCard,
     and the ExpressCard is then disconnected during the S3 state, the PC cannot resume 
     from the S3 state.

  2. There is a possiblility that a bluescreen occurs when S4->resume is running
     after an Expresscard to which some HID devices were connected, is disconnected
     during S4. 

  3. There is a possibility that a bluescreen occurs when a filter driver between
     the function driver and the Host driver issues a request, but the function 
     driver does not start.

  4. The Devices and Printers of Windows 7 show the unwanted Icon of a printer.

  5. PC cannot run "System Image Recovery" from External HDD on USB3.0 Port.

  6. The USB-FDD device is not detected when it is first connected to USB 3.0 port.

-- Utility (nusb3utl.exe)
  7. On a PC where both D720200 and D720200A are implemented, Utility tool shows the
    wrong FW version when nusb3utl.exe is run. This bug is derived from v2.0.26.0 
    driver package.

---------------------------------------------------------------------------
 Version 2.0.32.0 : December 17th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1435933
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Logo - Designed for Microsoft Windows XP family, x86 - DFW
                        Logo - Designed for Microsoft Windows XP family, x64 - DFW
                        Logo - Microsoft Windows Vista family, x86 Basic - Basic
                        Logo - Microsoft Windows Vista family, x64 Basic - Basic
                        Logo - Device - Compatible with Windows 7
                        Logo - Device - Compatible with Windows 7 x64
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64

-  The following issues, which depend on a specific device, were fixed.

    1. D-Link DWA160 (USB-WLAN Module) cannot find access points.

    2. USB 2.0 Gigabit Ethernet Adapter (WS-NWU220G) does not work after S3/S4-Resume.

    3. After ISDN-USB device (AVM FRITZ! Card USB V2.1) is disconnected during the S3 state,
       the PC cannot resume from the S3 state.
    
-  The following additional issues were fixed.

    1. When a USB3.0 ExpressCard is reconnected while the USB3.0 Host Controller Utility
       (nusb3utl.exe) is open, it shows the error message, "USB3.0 Host Controller not found!".
    
    2. After S3/S4-resume, the USB 3.0 Host Controller driver cannot detect a USB 2.0 device
       on which a Low Speed device is changed during the S3/S4 state.

       #Note# This issue occurs only when the Remote WakeUp function function is enabled in
              the function driver.

---------------------------------------------------------------------------
 Version 2.0.30.0 : November 30th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1433396
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
               Unclassiified
  Qualification Level:  Logo - Designed for Microsoft Windows XP family, x86 - DFW
                        Logo - Designed for Microsoft Windows XP family, x64 - DFW
                        Logo - Microsoft Windows Vista family, x86 Basic - Basic
                        Logo - Microsoft Windows Vista family, x64 Basic - Basic
                        Logo - Device - Compatible with Windows 7
                        Logo - Device - Compatible with Windows 7 x64
                        Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64

- Tuned the host driver to improve performance.

- Added the process to clear USBLEGCTLSTS register after the host driver obtained 
  Ownership. This process prevents BIOS and OS PCI driver from violating Ownership
  access when the host driver hands it off.

- The USB3.0-SATA Bridge LSI used by "Goodway NU6120", "Fujitsu HLMD001C" and
  "Mach Xtreme MXUB3MFX" freezes when it receives a Hot-Reset from the host. 
  From V2.0.30.0, we added recovery processes.

- The following issues were fixed.
    1. There is a possibility that a bluescreen occurs when in S3/S4 and resume
       occurs.

    2. When a User is using the USB 3.0 Host Controller Utility (nusb3utl.exe) and
       presses [F1] key on the keyboard, a blank pop-up is shown.

    3. When a User is using USB 3.0 Host Controller Utility (nusb3utl.exe) and 
       presses [F4] key, [BackSpace] key or [Enter] key on the keyboard, 
       an error message is shown.

---------------------------------------------------------------------------
 Version 2.0.26.0 : October 7th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1426595
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
  Qualification Level: 	Logo - Designed for Microsoft Windows XP family, x86 - DFW
						Logo - Designed for Microsoft Windows XP family, x64 - DFW
						Logo - Microsoft Windows Vista family, x86 Basic - Basic
						Logo - Microsoft Windows Vista family, x64 Basic - Basic
						Logo - Device - Compatible with Windows 7
						Logo - Device - Compatible with Windows 7 x64
						Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64

- Added a new function in "nusb3utl.exe" which can disable/enable
  "Dynamic U1/U2 state control function".

- The following issues were fixed.
	1. Bluescreen occurred when 3G modem card (TD-SCDMA RX-310) is connected to the PC through 
	   USB3 Host Controller.
	
	2. Yellow bang issues occurred when the following USB devices are connected 
	   to the PC through USB3 Host Controller.
	     a) Pinnacle Systems PCTV MCE IR Transceiver (Receiver)
	     b) Philips OVU4003/00 (Remote Receiver)
	     c) Philips RC1534501/00 (Remote controller)

---------------------------------------------------------------------------
 Version 2.0.20.0 : August 13th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1417969
  Product Name: Renesas Electronics USB3.0 Host Controller
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
  Qualification Level: 	Logo - Designed for Microsoft Windows XP family, x86 - DFW
						Logo - Designed for Microsoft Windows XP family, x64 - DFW
						Logo - Microsoft Windows Vista family, x86 Basic - Basic
						Logo - Microsoft Windows Vista family, x64 Basic - Basic
						Logo - Device - Compatible with Windows 7
						Logo - Device - Compatible with Windows 7 x64
						Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64

- Supported Windows Server 2008 Release 2 (x64)

- Supported the Selective Suspend function for an External Hub. 
  Please see section 1.4 & 2.8 of "USB 3.0 Host Controller Driver Application
  Note" for more detail.

- The following issues were fixed.
	1. On "Devices and Printers" of Windows 7, the Bus reported in the device 
   description in the device's Property page was not shown when USB devices were 
   connected to the computer through the USB 3.0 Host Controller.

	2. USB3 Driver didn't support the Dynamic U1/U2 state control function for
   USB3 Devices which support the Periodic Endpoint.
	   
	3. There was an issue with the Control transfer. This issue occurred in the 
   following cases.

    Case1. Yellow bang issues occurred when USB devices are connected
          to the PC through USB3 Host Controller.
    Case2. USB3 Host Controller cannot receive Vendor Requests.
	   
	   ##Caution##
   This issue occurs in Ver2.0.4.0 only. This does not occur with
   Ver1.0.20.0 or earlier.

	4. After suspend & resume with Microsoft's Zune HD connected through the
   USB 3.0 Host Controller, Device manager showed the yellow bang for this
   device.

- Hardware Ids of the device's Property page were designed as mixed-case on all 
   Windows OS. From Ver2.0.20.0, Hardware Ids of device's Property are designed as follows.
         Windows XP      :  Vid_XXXX (Designated by mixed-case)
         Windows 7/Vista :  VID_XXXX (Designated by capital letters only)


---------------------------------------------------------------------------
 Version 2.0.4.0 : May 14th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1403710

- Dynamic U1/U2 state control function was enabled.

- Driver Provider Name in the INF file was changed from NEC Electronics
  to Renesas Electronics.
 
- "Discontine storage access" issue was fixed.
  (Although we fixed "Discontinue storage access" issue in V1.0.19.0,
   we found some cases where this issue was reproduced.)

---------------------------------------------------------------------------
 Version 1.0.20.0 : March 31th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1397746

 ##Note##
 The Drivers in this package are certified with WLK1.5. 
 From the WLK1.5, categories for which USB3.0 xHCI drivers should be submitted
 were changed as follows.
 
 Submission Categories
   USB3 Host Controller : Device - USB Controller
   USB3 Root Hub        : Unclassified
 
 With this change, the INF file for driver installation is separated into
 two files. The nusb3xhc.inf is for the USB3 Host Controller, and the 
 usb3hub.inf is for the USB3 Root hub.

- The following bugs were fixed
 1. UQ WiMAX USB module (UD01SS) is not detected correctly.

 2. There is a possibility that bluescreen occurs when attempting hot plug
    operations at the downstream port of the USB2.0 HUB connected with 
    the USB3.0 port. 

---------------------------------------------------------------------------
 Version 1.0.19.0 : Februay 5th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
  Submission ID: 1387363

- The following functions were added.
 1. One of the notifications that we reported in the IBB-ND0-100001
    (Notification and product restriction information, Dec 14th 2009), 
    "Discontinue storage access after sleep (S3) and hibernation (S4) in 
    PC system", is fixed.

 2. When disabling an SS Device with "safely remove," the USB port connected 
    to the SS device is placed in U3 instead of U0.

- Added command line option to this installer.

  /v"NO_MONITOR=1"

- When this command line option is set, the USB3.0 Monitor Application
  (nusb3mon.exe/dll) is not installed.

  ##Caution##
   If the USB3.0 Monitor Application is already installed, it is necessary to
   uninstall the USB3 driver package of previous version before installing the 
   new USB3 driver package (v1.0.19.0 or later).

---------------------------------------------------------------------------
 Version 1.0.18.0 : December 1st, 2009
---------------------------------------------------------------------------
We received Device Logo in the USB Controller Subcategory of the WLK1.4.

As for system logo test,
Microsoft announced testing process for USB3.0 xHCI Controller below.  
http://www.microsoft.com/whdc/whql/resources/news/whqlnews_112409.htm

- Windows Logo Information
  Submission ID: 1377656
  Product Name: NEC Electronics USB3 Host-01
  Category: Device
  Subcategory: Bus Controllers and Ports > USB Controller
  Qualification Level: Signature Only - Microsoft Windows XP family, x86 - Unclassified
                       Signature Only - Microsoft Windows XP family, x64 - Unclassified
                       Logo - Microsoft Windows Vista family, x86 Basic - Basic
                       Logo - Microsoft Windows Vista family, x64 Basic - Basic
                       Logo - Device - Compatible with Windows 7
                       Logo - Device - Compatible with Windows 7 x64

- The following bugs were fixed.
 1. When host driver is disabled and uPD720200 goes to D3hot state,
    CLKREQ# does not work.

 2. When connectiong a certain Keyboard with fingerprint function, 
    PC can't enter S3/S4/S5 state.

 3. When using a certain ZIP Drive, file transfer is aborted.

---------------------------------------------------------------------------
 Version 1.0.17.0 : Nobember 2nd, 2009
---------------------------------------------------------------------------

- This version includes the CAT files signed by
  Microsoft Windows Hardware Compatibility Publisher.
  This device driver complies with WHQL certification as Unclassified 
  Category on Windows XP, Vista & 7. 
  The Submission ID for WHQL certification is 1371310.

- The following bug was fixed.
   1. Function drivers were not unloaded when disconnecting gold tree from
      the roothub port of USB3 HC. 

   2. After Warm Reset was issued, enumeration process might fail.

- InstallShield project file, License.rtf and versionDLL were updated.

- The following functions were added.
   1. When Link Errors frequently occur in the SuperSpeed-Port, driver changes 
      the connection from the SuperSpeed to HighSpeed.

   2. Transfer throughput was improved.

   3. Dynamic U1/U2 state control function was disabled. When enabling U1/U2 
      function, the device that used SuperSpeed link with host went down unexpectedly.
      We decided to disable this function to get interoperability.
      To get better interoperability, please use the FW version 3.0.2.1 
      released Nov.2nd 2009 or later.

---------------------------------------------------------------------------
 Version 1.0.14.0 : October 6th, 2009
---------------------------------------------------------------------------

- This version includes the CAT files signed by
  Microsoft Windows Hardware Compatibility Publisher.
  This device driver complies with WHQL certification as Unclassified 
  Category on Windows XP, Vista & 7. 
  The Submission ID of WHQL certification is 1358042.

- The following bugs are fixed.
   1. If the USB Device has multiple Endpoints with same EndpointAddress,
      the USB Device is not enumerated.

   2. A USB2.0 Device connected with mulitiple layered USB2.0 HUB is not detected
      after resuming Sleep and Hibernate.

- Updated InstallShield project file, script file, customDLL & versionDLL.

- Added the following functions to this installer.
   1. Command line option for checking existence of USB3.0 Host Controller.

       /v"CHECK_HW_EXIST=1"

     When this command line option is set, the installer checks existence of 
     the USB3.0 Host Controller(uPD720200). If the uPD720200 is not in the PC,
     this installer does not install the device drivers.

     ##Caution##
     To install the device drivers with this command line option after uninstalling
     the device drivers, it is necessary to restart on the PC.

   2. Previously, this installer did not install device drivers to the PC
      in which device drivers with same version are already installed.
      In this version, it reinstalls the device drivers to the PC.

---------------------------------------------------------------------------
 Version 1.0.12.0 : September 11th, 2009
---------------------------------------------------------------------------
- Updated End User Licence Agreement.

- This version includes the CAT files signed by
  Microsoft Windows Hardware Compatibility Publisher.
  This device driver complies with WHQL certification as Unclassified 
  Category on Windows XP, Vista & 7. 
  The Submission ID of WHQL certification is 1349589.

- This package includes "Install Shield 2010 Project Files" in the EXE folder
  so that cusotmers can customize the install package.

- Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support 
  the following languages.

  LCID : Language
   0401 : Arabic
   0404 : Traditional Chinese
   0405 : Czech
   0406 : Danish
   0407 : German
   0408 : Greek
   0409 : English
   040A : Spanish (Traditional)
   040B : Finnish
   040C : French
   040D : Hebrew
   040E : Hungarian
   0410 : Italian
   0411 : Japanese
   0412 : Korean
   0413 : Dutch
   0414 : Norwegian (Bokmal)
   0415 : Polish
   0416 : Portuguese (Brazilian)
   0419 : Russian
   041B : Slovak
   041D : Swedish
   041E : Thai
   041F : Turkish
   0424 : Slovenian
   0804 : Simplified Chinese
   0816 : Portuguese(Standard)
   0C04 : Chinese (Hong Kong)
   0C0A : Spanish (Modern)
   2C0A : Spanish (Latin America)

- The following bugs are fixed.
   1. Bluescreen sometimes occurs when starting WebCam application.

   2. The mouse-supported SelectiveSuspend function does not work when 
      it wakes up from suspend state.

   3. Can't access CD-ROM Media in a Blu-Ray Drive.

- Optimized SS/HS bulk transfer performance

---------------------------------------------------------------------------
 Version 1.0.10.0 : August 26th, 2009
---------------------------------------------------------------------------
- This version includes the CAT files signed by
  Microsoft Windows Hardware Compatibility Publisher.
  This device driver complies with WHQL certification as Unclassified 
  Category on Windows XP, Vista & 7. 
  The Submission ID of WHQL certification is 1346130.

- All files except for the CAT files are the same as Version1.0.10.0 Beta2

---------------------------------------------------------------------------
 Version 1.0.10.0Beta2 : August 24th, 2009
---------------------------------------------------------------------------
- This version includes Microsoft TestSigned CAT Files.
  Note: If this driver package is used on x64 Windows Vista/7,
        need to set the following command. 
        >bcdedit -set TESTSIGNING ON

- This installer package is generated with the InstallShield2010.
  If the previous driver package (v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed,
  please uninstall the previous driver package and install the new package.

- Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support 
  the following languages.

  LCID : Language
   404 : Traditional Chinese
   407 : German
   409 : English
   40A : Spanish
   40C : French
   410 : Italian
   411 : Japanese
   412 : Korean
   413 : Dutch
   804 : Simplified Chinese
   816 : Portuguese(Standard)

- The following bugs are fixed.
   1. Some hub devices are not detected after resuming Sleep and Hibernate.

   2. Bluescreen occurs after resuming Sleep and Hibernate.

- Known issue. This issue will be fixed in the next version.
   1. Bluescreen sometimes occurs when starting WebCam application.

---------------------------------------------------------------------------
 Version 1.0.7.0Beta : July 17th, 2009
---------------------------------------------------------------------------
- The following bugs are fixed.

1. USB Devices are not detected after resuming from Sleep and Hibernate.

2. Bluescreen occurs after resuming from Sleep and Hibernate.

3. USB-VGA Devices do not work correctly.

4. The message that bandwidth is getting low might not be indicated.

-The following function is Added
1. Add a Vendor Defined Command. 

---------------------------------------------------------------------------
 Version 1.0.1.0Beta : June 15th, 2009
---------------------------------------------------------------------------
- This package includes the following applications.

  1. nusb3mon.exe
  This application provides the following function. 
  USB3.0 Specificatin Section 11.1 describes the following function.
  To address the situation where a USB 3.0 device is connected to a
  USB 2.0-only port on a USB 3.0- capable host, after establishing a
  USB 2.0 high-speed connection with the device, it is recommended
  that the host inform the user that the device will support
  SuperSpeed operation if it is moved to a USB 3.0-capable port on the
  same host. If a USB 3.0 device is connected to a USB 3.0- capable
  host via a USB 2.0 hub, it is recommended that the host inform the
  user that the device will support SuperSpeed operation if it is
  moved to an appropriate host port or if the hub is replaced with a
  USB 3.0 hub.

  2. nusb3utl.exe 
  This application provides functions that show Driver Version 
  and Firmware Version.

- The following bugs are fixed.

1. Function driver is not unloaded after resuming from Sleep and Hibernate.

2. USB Remote wake up function does not work correctly.

3. Bluescreen occurs upon repeated hot-plug of FS-Speaker Device 
   that is connected to the USB 3.0 HC through an HS Hub.

---------------------------------------------------------------------------
 Version 0.9.12.0Beta : May 29th, 2009
---------------------------------------------------------------------------
- Changed installer package configuration.

  1. EXE type
     *All files are included in the EXE file.
     *Combined x86 and x64 in one package.

  2. ZIP type
     *Composed of 3 items: setup.exe, x86 folder and x64 folder.
     *All files for x86 are in x86 folder.
     *All files for x64 are in x64 folder.
     *Setup.exe installs drivers automatically.

---------------------------------------------------------------------------
 Version 0.9.12.0Beta : May 27th, 2009
---------------------------------------------------------------------------
- The following bugs are fixed.

1. Function driver is not unloaded after resuming from Sleep and Hibernate.

2. While repeatedly hot-plugging a USB2.0 device, the device is not detected.

3. When connecting two USB Devices and then resuming from Sleep and Hibernate,
   neither device is detected.

4. Bluescreen occurred when USB-VGA device is running.

5. Dual Display mode of a USB-VGA device can't operate.

---------------------------------------------------------------------------
 Version 0.9.4.0Beta : March 27th, 2009
---------------------------------------------------------------------------
- Support for Super Speed Transactions

---------------------------------------------------------------------------
 Version 0.9.3.0Beta : March 9th, 2009
---------------------------------------------------------------------------
- The following bugs are fixed.

1. If the system is booted up with a USB device already present on the USB 
   port, the USB port is inoperative and cannot recover even if the 
   USB device is unplugged and then plugged back in.

---------------------------------------------------------------------------
 Version 0.9.0.0Beta : February 9th, 2009
---------------------------------------------------------------------------
- First Beta Version Release


